top of page

rig assembly

How to build your Charred Axle Rigs

A.T.R_ASSEMBLY_1_210923.png

All Terrain Roller

ORIGIN: AINASH

PURPOSE: Swift reconnaissance vehicle used to traverse difficult terrain.

ASSEMBLY

- This Rig comes with a standard front bumper. If you want to attach a Slam Ram, it will replace this front bumper.

​

- The 2 side wings can be positioned down and in, or up and out. These parts will require glue to fix in the chosen position.

ORIGIN: BAKKOROTH

PURPOSE: Once known as Leader Drills, they were at the forefront of extending mine shafts and tunnels on Bakkoroth.

ASSEMBLY

- The Bakkor Miner only requires its 6 wheels to be glued in place. 

​

- If you want to attach this Rig's Slam Ram, place a small amount of glue on the side bolts and slot it in between the two front 'Arms' of the Rig's chassis as shown.

BAKKOR_MINER_ASSEMBLY_1_250923.png

bakkor
miner

DESERT_SPEAR_ASSEMBLY_1_250923.png

desert spear

ORIGIN: AINASH

PURPOSE: A two wheeled, lightweight and stream lined vehicle designed to maintain high speed across the vast sand planes of Ainash. Deployable stabiliser wings help keep it grounded amid strong winds.

ASSEMBLY

- This Rig's 2 wheels slot into place and require gluing as shown. The larger wheel goes at the back of the Rig.

​

- The 2 side wings can be positioned down and in, or up and out. These parts will require glue to fix in the chosen position.

​

- The Desert Spear's Slam Ram slots over the front wheel of the Rig. This part is optional and will require glue to be installed. 

ORIGIN: EARTH

PURPOSE: A salvaged and revitalised planetary rover vehicle that was transported with the human Outreach expedition mission.

ASSEMBLY

- The Human Hot Rod only requires its 4 wheels to be glued in place. 

​

- If you want to attach this Rig's Slam Ram, place a small amount of glue on the side connection points and slot it over the Rig's front grill as shown.

HOT_ROD_STEP_1_ASSEMBLY_250923.png

human
hot rod

HUMAN_TRUCK_ASSEMBLY_STEP_1_260923.png

human truck

ORIGIN: EARTH

PURPOSE: One of a handful of surviving military personnel vehicles shipped to the Tarapor star system with the Human Outreach expedition mission. This vehicle would be replicated by the Ainashians to aid in the fight against the Sprites.

ASSEMBLY

- The Human Truck only requires its 4 wheels to be glued in place. 

​

- If you want to attach this Rig's Slam Ram, place a small amount of glue on the connection points and place the top 3 connection points against the top bar of the bumper, and the bottom 2 connection points will slot in underneath the bottom bar of the bumper.

CHARREDAXLE.COM

Charred Axle is a registered trademark. All rights reserved 2023

bottom of page